Product Search
Our Products
Manufacturing Electroplating Galvanizing Mild Steel Bolts & Nuts High Tensile Fasteners Structural Bolt, Nuts & Washers Cladding Fasteners Stainless Steel Fasteners Socket Product Screws Masonry Fasteners Threaded Rod Rivets Pins & Grease Nipples Nuts Washers Corrosion Preventatives, Sealants, Lubricants Tools Lifting & Rigging Equipment Associated Fasteners

Image Description

Sleeve Anchors Countersunk Head

PRODUCT INFORMATION

  • Suitable for use in concrete, Solid Brick, Solid Block, Grout Filled Block,
  • Countersunk head designed for a flush finish for both function and appearance,
  • Sleeve Anchor diameter is the same as that for the whole,
  • As the anchor is tightened the bolt is drawn into the expansion sleeve to develop a locking action against the walls of the hole,
  • Available on request Working stress design, Limit State Design, Spacing Anchors, Edge Distance,

 

Installation Instructions

  1. Using the correct diameter drill bit, drill as hole into the base material to a depth of at least 13mm or one anchor diameter deeper than the required embedement required,
  2. Blow the hole clear of dust and other material,
  3. Drive the Sleeve Anchor through the fixture into the anchor hole until the head is firmly seated against the fixture. Ensure anchor is driven to the correct anchor depth,
  4. Tighten the anchor by turning the head 3 to 4 turns or by applying the guide installation torque from the finger tight postion.
   Size      Drill Size (mm)Fixture Clarence (mm)Embed Depth (mm)Fixture Thickness (mm)
6.5 x 38   6.58306
6.5 x 556.583025
6.5 x 756.583045
6.5 x 1006.583070
8 x 608103525
8 x 858103550
10 x 7510124035
10 x 10010124060
10 x 12010                       12                  40                       80

 

Sort By
Keyword
Search In

6.5x75 CSK HD SLEEVE ANCHOR 6.5x75 CSK HD SLEEVE ANCHOR Code: 9DFS065075        $3.2233 NZD (Each) 
6.5x100 CSK HD. SLEEVE ANCHOR 6.5x100 CSK HD. SLEEVE ANCHOR Code: 9DFS065100        $4.1657 NZD (Each) 
D8 x 60 CSK SLEEVE ANCHOR Z/CH D8 x 60 CSK SLEEVE ANCHOR Z/CH Code: 9DFS08060        $6.7743 NZD (Each) 
8 X 85 CSK HEAD SLEEVE ANCHOR 8 X 85 CSK HEAD SLEEVE ANCHOR Code: 9DFS08085        $4.5071 NZD (Each) 
D10 X 75 CSK HD SLEEVE ANCHOR D10 X 75 CSK HD SLEEVE ANCHOR Code: 9DFS10075        $6.5831 NZD (Each) 
D10 X 125 CSK HD SLEEVE ANCHOR D10 X 125 CSK HD SLEEVE ANCHOR Code: 9DFS10125        $8.1947 NZD (Each) 


< Prev | PAGE 1 | Next >