Product Search
Our Products
Manufacturing Electroplating Galvanizing Mild Steel Bolts & Nuts High Tensile Fasteners Structural Bolt, Nuts & Washers Cladding Fasteners Stainless Steel Fasteners Socket Product Screws Masonry Fasteners Threaded Rod Rivets Pins & Grease Nipples Nuts Washers Corrosion Preventatives, Sealants, Lubricants Tools Lifting & Rigging Equipment Associated Fasteners

Image Description

Wafer Head Phillips Drive

product information WAFER head PHILLIPS drive screw for metal

  • Wafer Head Phillips Drive Screw for metal,
  • Class 2 finish (C2),
  • Class 3 finish (C3),
  • Class 4 finish (C4),
  • Wafer head for jobs needing a low profile,
  • For General fixing jobs, brackets, metal deck clips, electrical fittings, sheet meatl, signs, light angle and fittings etc.

How to Use

  • Measure the total thickness of the materials to be drilled,
  • Choose a screw with a drilling capacity equal to or greater than the total thickness of materials to be drilled
    Determine the best head style for the intended application,
  • Choose a screw long enough to allow at least 3 threads to protrude beyond the metal being fastened to,
  • Select the correct driver for the screws being used,
  • Fit the driver to a power screwdriver set to high approximately 2500 rpm,
  • Put screw into driver and place at fastening position,
  • Push sharply on screwdriver to create starting point,
  • Squeeze screwdriver trigger and maintain firm end pressure until screw has drilled and fastened.

 

 

Sort By
Keyword
Search In

10-16 X 16 C2 WAFER S/D SCREW 10-16 X 16 C2 WAFER S/D SCREW Code: S10DWC0162  Class 2  10G    $0.2458 NZD (Each) 
10-16 X 16 C4 WAFER S/D SCREW 10-16 X 16 C4 WAFER S/D SCREW Code: S10DWC0163  Class 4  10G    $0.5600 NZD (Each) 
10-16 X 22 C2 WAFER S/D SCREW 10-16 X 22 C2 WAFER S/D SCREW Code: S10DWC0222  Class 2  10G    $0.3551 NZD (Each) 
10-16 X 22 C3 WAFER S/D SCREW 10-16 X 22 C3 WAFER S/D SCREW Code: S10DWC0223  Class 3  10G    $0.4644 NZD (Each) 
10-16 X 30 C3 WAFER S/D SCREW 10-16 X 30 C3 WAFER S/D SCREW Code: S10DWC0303  Class 3  10G    $0.5327 NZD (Each) 
10-16 X 40 C3 WAFER S/D SCREW 10-16 X 40 C3 WAFER S/D SCREW Code: S10DWC0403  Class 3  10G    $0.6282 NZD (Each) 
10-24 X 16 C3 WAFER S/D SCREW 10-24 X 16 C3 WAFER S/D SCREW Code: S10DWF0163  Class 3  10G    $0.3278 NZD (Each) 
10-24 X 22 C2 WAFER S/D SCREW 10-24 X 22 C2 WAFER S/D SCREW Code: S10DWF0222  Class 2  10G    $0.4507 NZD (Each) 
10-24 X 22 C3 WAFER S/D SCREW 10-24 X 22 C3 WAFER S/D SCREW Code: S10DWF0223  Class 3  10G    $0.5054 NZD (Each) 
10-24 X 22 410 WAFER S/D SCREW 10-24 X 22 410 WAFER S/D SCREW Code: S10DWF02241  Grade 410  10G    $3.0345 NZD (Each) 
10-24 X 30 C2 WAFER S/D SCREW 10-24 X 30 C2 WAFER S/D SCREW Code: S10DWF0302  Class 2  10G    $0.6693 NZD (Each) 
10-24 X 30 C3 WAFER S/D SCREW 10-24 X 30 C3 WAFER S/D SCREW Code: S10DWF0303  Class 3  10G    $1.0244 NZD (Each) 
10-24 X 30 410 WAFER S/D SCREW 10-24 X 30 410 WAFER S/D SCREW Code: S10DWF03041  Grade 410  10G    $3.5162 NZD (Each) 
10-24x 22 C2 WAFER TEK H-PACK 10-24x 22 C2 WAFER TEK H-PACK Code: S10HPR02  Class 2  10G    $3.1686 NZD (Each) 
10-24x 30 C2 WAFER TEK H-PACK 10-24x 30 C2 WAFER TEK H-PACK Code: S10HPR03  Class 2  10G    $3.2096 NZD (Each) 
12-24x32 C3 WAFER DEEP HOLE SD 12-24x32 C3 WAFER DEEP HOLE SD Code: S12DWF0323  Class 3  12G    $2.1120 NZD (Each) 


< Prev | PAGE 1 | Next >